Ask Rob Jeeves - Home Sea Commander Mounting Systems Sea Commander Mounting Cradle Flying Wires Wheel Pants Full Scale Reference Pictures Sea Commander Kits Order FormSea Commander Kits Sea Commander Recommened Links Sea Commander - Photo Gallery Sea Commander - About Ryan Holm

FUSELAGE STAND & FLOAT MOUNTING CRADLE

An Innovative new design which simplifies the set-up and mounting of floats on model airplanes.

This stand, constructed of CNC router cut 1/2" Baltic Birch ply components, can be used for the installation of Sea Commander floats or any other brand of floats you choose.

Special Features

  • adjustable for any length of model floats (intended for 36" to 1/3 scale size. Smaller version coming soon.)
  • adjusts to any float spread width up to 30" wide, center of float to center of float
  • adjusts float incidence
  • adjusts to any angle bottom from flat to 22 degrees
  • fast and easy assembly
  • all components required are included. * No extras needed
  • can be made into a carrying cradle for transporting your airplane

MOUNTING CRADLE KIT INCLUDES:

  • 1 - 4" x 36" & 1 - 5 1/4" x 36" base
  • 2 - sliding mounting plates
  • 2 - 2 piece, adjustable V cradles
  • 4 - L shaped sliding cradles
  • 2 - 18" lengths of heavy walled PVC plastic tubing
  • 4 - 1/4" - 20 X 1 3/4" carriage bolts
  • 8 - 1/4" - 20 X 1 1/4" carriage bolts
  • 2 - 1/4" - 20 X 1 1/4" hexhead bolts
  • 14 - 1/4" - 20 wing nuts
  • 16 - 1/4" flat washers
  • Self adhesive protective foam padding
  • Illustrated assembly instructions
  • General float setup and stand usage guidelines
    * All metal hardware is corrosion resistant zinc plated

Price - $75.00 USD


 FUSELAGE STAND & FLOAT MOUNTING CRADLE COMBO

  • 2 piece base - slides forward and aft to adjust to the fuselage length (23" - 44")
  • 2 piece uprights - slide up and down to adjust to heights needed (max. 29 3/4")
  • L shaped brackets on uprights slide in and out to adjust to the fuselage width (4" - 12")

Combo includes:

  • Float mounting cradle
  • Fuselage stand which includes;
  • 1 each - 2 piece base
  • 2 each - 2 piece uprights
  • 4 each - L shaped brackets

Plus hardware:

  • 20 - 1" carriage bolts
  • 4 - 1 1/2" carriage bolts
  • 4 hex head bolts
  • 28 wing nuts
  • 30 washers

Assembly and usage instructions included
Items needed to complete the fuselage stand - 30 min. epoxy to glue the bottom half of the uprights to the base

Combo price - $150.00 US


Home | Floats | GullWing | Sea Foam | Mounting Systems | Mounting Cradle | Other Floats
Flying Wires | Wheel Pants | Reference Pictures | Kits | Order | Links | Gallery | About
 
Copyright © 2004- Sea Commander - Holm Products - All Rights Reserved
CONTACT US