Sea Commander Floats

Cessna 182 with modeler's own mounting system
Modeler: Steven Wells
Monterey, California

I must say, "You (RC Commander) manufacture the best float kits available globally today! I have bought many other kits; both built-up and finished-fiberglass and none have lasted more then one-year without some type of repair or maintenance being required. I fly just about year-round in Monterey California in some of the most brackish-water environments, as well as the ocean without any float issues with your products. You have exceeded my best expectation by 100%, and I can see many years ahead of trouble-free float flying.

Thank you for supporting the hobby industry with such a fine product!

1/4 Scale Hanger 9 Cub on 46" Sea Commander
EDO 2000 series float with scale mounting
system.
Modeller: Steve Daly
Ontario, Canada

"Wingspan 100", the floats are covered with Flite Metal,
its powered by a Ryobi 31cc gas engine, and flys well"

66" span Beaver on Sport Commander floats
Modeller: Richard Branderhorst
Netherlands
"My Beaver got last week its wings and floats wet in a successful maiden flight, see pics. Weather conditions at the time were enough to make a real float plane pilot scare out!!! The floats handled well in these rough waters."

Sig LT-40 on 38" Sea Commander
Gull Wing Floats
system.
Modeller: Dave Thomson
Ontario, Canada

"Maiden flight of the Sig LT-40 was perfect. I have not flown in a number of years nor have I ever flown off of water. Your floats worked beautifully as they handled my less than perfect landings with ease. I was able to taxi back to the boat each time with the engine running."

Hogbipe-on. 36" Sea Commander
Gull Wing Floats with Sea Commander's
sport spreader bar kit
Modeler: Robert Buhl
Seattle, USA
"My set of Gull Wing Floats arrived today, very well packaged in
excellent condition. Those floats have an excellent appearance, and now comes the 'fun' job! Thank you."

Modeler: Bernard Cawley
Kent, USA
"Just wanted you to know that the lightweight Sport Commanders acquitted themselves admirably at the Northwest Seaplane Championships (Wamic, Oregon) a couple of weeks ago on my electrified Sig Kadet LT-25. All up they added 22.5 ounces to the airplane (this is the delta weight of the fuselage between the normal gear installation and the floats as flown). I ran them unpainted, with one Ernst .90 sized water rudder.
I love how smoothly they land with little of the skipping you get with flat-bottomed floats. "

Cub on 38" Sea Commander
EDO floats with scale mounting
system
Modeler: Frank Fraser
British Columbia, Canada

Balsa USA 1/3 scale Super Cub
on Sea Commander 1/3 scale
EDO 2000 series float
Modeler: Murray Marley
White Rock, British Columbia
Aircraft weight on wheels is 40 lbs. Weight with wheels removed and floats installed is 43lbs. A weight difference of only 3 lbs, change over time from wheels to floats is only 20 minutes.

Beaver on scale Sea Commander Floats.
Modeler: David Bowden
Salsbury cove, ME

<<< BACK

Home | Floats | GullWing | Sea Foam | Mounting Systems | Mounting Cradle | Other Floats
Flying Wires | Wheel Pants | Reference Pictures | Kits | Links | Gallery | About

Copyright � 2004- Sea Commander - Holm Products - All Rights Reserved
CONTACT US