Sea Commander

Ask Rob Jeeves - Home Sea Commander Mounting Systems Sea Commander Mounting Cradle Flying Wires Wheel Pants Full Scale Reference Pictures Sea Commander Kits Sea Commander Recommened Links Sea Commander - Photo Gallery Sea Commander - About Ryan Holm

SEMI SCALE EDO 2000 ROUND TOP 

  Sea Commander Floats

108" span Decathalon on 48" EDO 2000 Round Top Floats
mounted with Sea Commander's structural, streamlined aluminum mounting system.

 

SPECIAL FEATURES which add to the durability of all the Sea Commander floats
A. EXCLUSIVE: MOLDED-IN fiberglass joiner lip and side stiffener.
B. MOLDED-IN fiberglass bottom reinforcements.
C. FOUR Fiberglassed bulkheads.
D. FIVE watertight compartments.
E. COMPOSITE reinforcements in scale mounting positions.
F. COMPOSITE reinforced transom for water rudder mounting.

TO DETERMINE THE LENGTH OF FLOAT NEEDED FOR YOUR AIRPLANE:

  1. Measure from prop drive plate to plane's C of G. The float when measured from the step to the bow (front end) should be about 2" longer then the measurement on the plane, depending on actual size of float. Smaller floats may be a bit less and larger floats may be a bit more. 
    OR
  2. Use a scale factor from the full size aircraft float, if known.

NOTE: If float length falls between available sizes, use longer length.

 
LENGTH

29"
32"
36"
38"
40"
42"
44"
46"
48"
51.5"
1/3
 
POWER

.15 - .20
.20 - .40
.40 - .60
.40 - .60
.60 - .80
.60 - .80
.90 - 1.20
.90 - 1.20
1.20 +
1.20 +
3.0 +

 APPROX
WEIGHT


10 OZ.
12 OZ.
16 OZ.
18 OZ.
20 OZ.
22 OZ.
24 OZ.
26 OZ.
28 OZ.
34 OZ.
56 OZ
 
A

3 3/4"
4 1/4"
5 1/4"
5 1/4"
5 3/4"
5 3/4"
6 3/4"
6 3/4"
7"
7"
8 1/2"
 
B

3"
3 3/4"
4 1/4"
4 1/4"
4 3/4"
4 3/4"
5 1/4"
5 1/4"
5 3/4"
5 3/4"
7"
 
C

15 1/2"
17"
19 1/2"
19 1/2"
21 1/4"
21 1/4"
23 3/4"
23 3/4"
25 3/4"
25 3/4"
33 1/2"
 
D

13 1/2"
15"
16 1/2"
18 1/2"
18 3/4"
20 3/4"
20 1/4"
22 1/4"
22 1/2"
25 3/4"
30 1/2"
PRICE
IN U.S. FUNDS

$151.28 
$168.31 
$192.46 
$204.79 
$217.30 
$229.98 
$242.83 
$255.85 
$269.05 
$297.01 
$416.10 
PKG PRICE
IN U.S. FUNDS

$231.85
$248.89
$280.39
$293.35
$307.11
$333.41
$357.89
$377.07
$394.89
$422.85
$547.92

*** 46" Floats are the PERFECT float for the Balsa USA and SIG 1/4 scale Cubs ***

1/3 SCALE EDO 1450 ROUND TOP FLOAT

  • For 1/3 scale models in the 30 - 50 lb. Range
  • Molded - in hydrodynamic boosters for getting up on the step quickly
  • 5 bulkheads installed, 6 compartments (includes small compartment in the bow for nose ballast, as required)
  • Molded-in spreader bar mounting points
  • Floats are pressure checked for leaks
  • Ready to paint and install fittings
  • **60", 64", 65 1/2" versions available**


Balsa USA 1/3 scale Ercoupe
Built by Oscar Weingart

For more information on floats, E-MAIL our float division. 

 

Home | Floats | GullWing | Sea Foam | Mounting Systems | Mounting Cradle | Other Floats
Flying Wires | Wheel Pants | Reference Pictures | Kits | Links | Gallery | About
 
Copyright © 2004- Sea Commander - Holm Products - All Rights Reserved
CONTACT US